pH Adjustment

Index View

Catalog Home / Home_and_Commercial_Water_Purification_Products / Filtration_Media / pH_Adjustment

Calcite Acid Neutralizer

List all 2 products in this group

Flowing acidic water through a bed of Calcite will dissolve it and raise the pH on water from 5.8 to 6.6. The bed should be backwashed on a regular basis and replaced periodically as it dissolves.

Corosex F Acid Neutralizer

List all 3 products in this group

Corosex can be mixed with Calcite to treat waters as low as 4.0 Ph. Up flow filters are recommended unless the water is 5 grains hard. A Minimum of 50% calcite is recommended to prevent cementing.

Soda Ash Acid Neutralizer

List all 0 products in this group

Dissolved in water and pumped with a chemical feed pump soda ash works well for increasing the pH of most low pH conditions.

Share |

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

Are You Lost?
See Your Breadcrumbs

9/5/2010 at 11:58:14 PM